It is possible to make the IQ connect to your WiFi network. There are a few limitations:

• IQ supports WiFi networks only at 2.4GHz (so no 5GHz)

• WEP (not recommended) or WPA2 are supported.

Step 1:

In order to configure the WiFi settings, please open the SALTO KS app on your mobile phone and make sure Bluetooth is enabled on it.

Step 2:

Go to settings (located at the bottom right corner), scroll down a little and select "Enable IQ connection".

Step 3:

Now, press the reset button on the IQ for 2 seconds, until the green light starts flashing every second. You now have 2 minutes to complete the next step.

Step 4:

In the app on your phone press "start" and scan the barcode on the IQ with your camera. This will establish the Bluetooth connection between your phone and the IQ.

Step 5:

Follow the steps in the app to complete setting up the WiFi network connection. When you are done, the IQ will be connected to the network and resume normal operation.

Please note: The WiFi settings will be retained even after resetting or power cycling your IQ, so this process only needs to be completed once for each IQ.